---
title: "Ball Valve Types Buyer's Guide: Floating vs Trunnion, Full vs Reduced Bore, and Seat Options"
date: 2026-10-22T02:34:58Z
modified: 2026-10-27T00:39:57Z
permalink: "https://www.xintaivalves.com/blog/ball-valve/ball-valve-types-buyer-guide/"
type: post
status: publish
excerpt: ""
wpid: 17060
categories:
  - Ball Valve
tags:
  - Ball Valve
  - Ball Valve Comparisons and Applications
  - Ball Valve Design and Materials
  - Ball Valves Types and Working Principle
  - Floating Ball Valve
  - Trunnion Valves
featured_image: "https://www.xintaivalves.com/wp-content/uploads/2026/10/ball-valve-types-cover.webp"
featured_image_alt: "A large light gray flanged ball valve with a bolted body, top actuator, and support feet, set beside dark blue text reading Ball Valve Types Buyer's Guide and bore/seat labels."
timestamp: 2026-10-27T00:39:57Z
---

Table of Contents

[Toggle](#)

- [Quick Answer](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#Quick_Answer)
- [Why Do “Types of Ball Valves” Lists Confuse Buyers?](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#Why_Do_%E2%80%9CTypes_of_Ball_Valves%E2%80%9D_Lists_Confuse_Buyers)
- [The Three Decisions Behind Every Ball Valve Type](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#The_Three_Decisions_Behind_Every_Ball_Valve_Type)
- [Floating vs Trunnion: Which Ball Support Design Should You Specify?](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#Floating_vs_Trunnion_Which_Ball_Support_Design_Should_You_Specify)
- [Full Bore vs Reduced Bore: When Is the Extra Flow Worth Paying For?](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#Full_Bore_vs_Reduced_Bore_When_Is_the_Extra_Flow_Worth_Paying_For)
- [Soft Seat vs Metal Seat: Which Ball Valve Seat Type Fits Your Media?](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#Soft_Seat_vs_Metal_Seat_Which_Ball_Valve_Seat_Type_Fits_Your_Media)
- [Ball Valve Type Decision Matrix](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#Ball_Valve_Type_Decision_Matrix)
- [Which Ball Valve Family Matches Your Duty?](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#Which_Ball_Valve_Family_Matches_Your_Duty)
- [What Should You Confirm Before You Request a Quote?](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#What_Should_You_Confirm_Before_You_Request_a_Quote)
- [FAQ](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#FAQ)
    - [1. Can one ball valve type cover an entire plant?](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#1_Can_one_ball_valve_type_cover_an_entire_plant)
    - [2. Does high pressure always mean a trunnion ball valve?](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#2_Does_high_pressure_always_mean_a_trunnion_ball_valve)
    - [3. Which ball valve type should I use for throttling?](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#3_Which_ball_valve_type_should_I_use_for_throttling)
- [The Bottom Line](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/ball-valve-types-buyer-guide.md#The_Bottom_Line)



## Quick Answer

Almost every ball valve type comes down to three choices: how the ball is supported (floating or trunnion), how much flow the bore passes (full or reduced), and what seals the ball (soft or metal seat). Body style follows pressure and size, bore follows flow and cost, and seat follows temperature and media. XINTAI manufactures floating and trunnion ball valves with both seat families, and confirms body, bore, seat and end connection against the drawing before production.

## Why Do “Types of Ball Valves” Lists Confuse Buyers?

Most lists mix three separate questions and turn the result into a dozen “types”. In practice a valve is a combination: a 2″ floating, full-bore, soft-seated unit and a 24″ trunnion, reduced-bore, metal-seated unit belong to the same family and are completely different purchases.

Getting the combination right keeps cost, flow and maintenance in line. This guide covers the ball valve types a buyer actually chooses between, separates the three decisions behind them, and adds a selection matrix, the product families for each duty, and a checklist for your next quote. Start from [our ball valve range](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/page/ball-valve-collection.md).

## The Three Decisions Behind Every Ball Valve Type

1. Ball support – floating or trunnion-mounted.
2. Bore – full or reduced.
3. Seat – soft or metal.

Everything else – one-piece or three-piece, top entry, welded body, three-way or V-notch – is either a body variant or a service duty built on those three choices. So the fastest way to identify a type is to name all three parts: for example, a floating, full-bore, soft-seated valve.

## Floating vs Trunnion: Which Ball Support Design Should You Specify?

A floating ball valve carries the ball between two seats. Line pressure pushes the ball downstream into the seat to seal, so pressure helps the seal. The design is compact and economical, which suits small and mid sizes at moderate pressures – a natural fit for utility, water and general chemical lines. See our [casting floating ball valve](https://www.xintaivalves.com/products/casting-floating-ball-valve/) family.

![A silver-colored flanged ball valve with a stem on top, bolted body halves, and cast markings WCB L768 and 2 300 on the side.](https://www.xintaivalves.com/wp-content/uploads/2022/01/组件-2-–-1.jpg)

Casting Floating Ball Valve

A floating ball seals as line pressure pushes it into the downstream seat, making it a compact choice for smaller, moderate-pressure isolation duties. Confirm bore and seat grade on the drawing.

[View Product](https://www.xintaivalves.com/products/casting-floating-ball-valve/)



A trunnion ball valve anchors the ball top and bottom on trunnions, so the ball cannot shift and the seat rings move instead. The trunnions and bearings carry the pressure-induced load on the ball, reducing the load transferred to the seats and helping control operating torque at larger sizes and higher pressures. This is the usual choice for larger pipelines and higher pressure classes, and our [casting trunnion ball valve](https://www.xintaivalves.com/products/casting-trunnion-ball-valve/) family covers larger size and pressure combinations in soft or metal seat.



| Question | Floating | Trunnion |
| --- | --- | --- |
| How is the ball held? | Rests between the two seats | Fixed on top and bottom trunnions |
| What loads the seat? | Line pressure pushes the ball into the seat | Seat rings move to the ball |
| Typical fit | Smaller sizes, moderate pressure, cost-sensitive | Larger sizes, higher pressure classes |
| Watch | Seal depends on pressure direction | Confirm seat arrangement and cavity relief on the drawing |

Trunnion construction does not, by itself, prove how the seats seal or relieve pressure. Confirm that on the datasheet and drawing, not on the mounting style.

![Cross-section diagram titled “Floating vs Trunnion” comparing a floating ball valve with a trunnion ball valve, both showing metal bodies, blue seats and central balls.](https://www.xintaivalves.com/wp-content/uploads/2026/10/floating-vs-trunnion-ball-valve.webp)

## Full Bore vs Reduced Bore: When Is the Extra Flow Worth Paying For?

Full-bore valves provide a relatively unrestricted flow passage, with bore dimensions defined by the applicable standard and design. For pigging service, confirm the minimum clear bore, internal geometry and compatibility with the specified pig. It costs more and produces a larger, heavier valve for the same nominal size.

Reduced bore uses a smaller opening. The valve is lighter and cheaper, but it introduces a pressure drop and cannot be pigged.

- Choose full bore when the line must stay at maximum flow, when the valve can be pigged, or when lost pressure costs more than the valve.
- Choose reduced bore for utility, vent, drain and lower-flow lines where the restriction does not matter.

Compare the flow coefficient (Cv) – a number for how much flow a valve passes at a given pressure drop – and the required line size before you decide. [How full bore and reduced bore differ](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/full-bore-vs-reduced-bore-ball-valve.md) covers the trade-off in more detail.

## Soft Seat vs Metal Seat: Which Ball Valve Seat Type Fits Your Media?

The seat is what presses against the ball to stop flow, so seat choice decides how tight the valve shuts and how hot or abrasive the service can be.

- Soft seat (PTFE, reinforced PTFE, PEEK): closes tightly at low torque in clean media at moderate temperature. PEEK adds heat and pressure margin but needs more sealing force.
- Metal seat: handles high temperature, abrasion, slurry and thermal cycling. Metal-seated designs often require higher operating torque. Specify the allowable seat leakage and test conditions rather than assuming bubble-tight shut-off.

Treat seat limits as model-specific. The temperature ceiling belongs to the seat grade and the assembled valve, not to the words “soft seat”. [Soft-seated vs metal-seated valves](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/soft-seated-vs-metal-seated-valves.md) compares where each one earns its place.

![Diagram titled Bore & Seat Options showing Full Bore and Reduced Bore valve bodies with blue flow arrows, beside Soft Seat (white ring) and Metal Seat (metal ring).](https://www.xintaivalves.com/wp-content/uploads/2026/10/full-reduced-bore-soft-metal-seat.webp)

## Ball Valve Type Decision Matrix



| Your priority | Body | Bore | Seat |
| --- | --- | --- | --- |
| Low pressure, smaller size, tight budget | Floating | Reduced or full | Soft |
| High pressure or large size | Trunnion | Select by required Cv, allowable pressure drop and pigging requirements | Soft or metal |
| Maximum flow or pigging | Floating or trunnion | Full | Per media |
| High temperature or abrasive media | Floating or trunnion | Select by required Cv, allowable pressure drop and pigging requirements | Metal |
| Frequent inline inspection | Top entry | Per duty | Per media |

Use the table to shortlist. The final answer still follows the pressure-temperature rating for your exact model, size and body material.

## Which Ball Valve Family Matches Your Duty?

- Standard isolation – floating or trunnion bodies, soft or metal seats.
- Maintenance without cutting the line – a [top-entry ball valve](https://www.xintaivalves.com/products/top-entry-ball-valve/) lets you reach the ball through the top closure. That is maintenance access, not work on a pressurized line.
- Buried or hard-to-reach lines – fully welded bodies reduce external leak paths.
- Throttling and control – a V-notch or segment ball valve shapes the flow instead of only opening or closing it. A standard isolation ball valve is not a control valve.
- Diverting or mixing – three-way L-port and T-port valves replace several fittings; ask for the position diagram.

## What Should You Confirm Before You Request a Quote?

1. Medium, concentration, design and operating temperature, pressure and cycle count.
2. The job the valve does: isolation or flow control.
3. Size and bore, and the standard the bore is measured against.
4. Body and seat material, plus the pressure-temperature rating for that model and size.
5. End connection type and face standard.
6. Operation and, for actuated valves, the torque figure.
7. The leakage criterion for seat and shell tests, such as an API 598 or ISO 5208 rate. [Valve testing methods](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/post/valve-testing-methods.md) explains why seat and shell tests are different evidence.
8. The documents your project needs: datasheet, drawing, test reports and any NDT or qualification scope.

One caution: family pages often share a broad specification table. The governing number is the one for your exact model, size and body material. If two documents on the same model disagree, treat the configuration as unconfirmed and ask.

## FAQ

### 1. Can one ball valve type cover an entire plant?

Rarely. Standardizing on one bore, seat and body keeps spares simple, but the wrong standard forces oversized valves or premature seat wear on the harder duties. Most plants standardize by function – one type for isolation, another for control – rather than on a single valve for the whole site.

### 2. Does high pressure always mean a trunnion ball valve?

No. Pressure is only one factor. Size, the force needed to turn the valve and the operating torque decide too, because a floating design becomes hard to operate as the valve grows. Confirm the configuration for your size and pressure class rather than assuming.

### 3. Which ball valve type should I use for throttling?

Not a standard isolation ball valve. Throttling is a control duty, so use a V-notch or segment ball valve, where the shaped passage gives usable flow characteristics. Throttling an isolation valve wears the seat and gives poor control.

## The Bottom Line

Choose the body from pressure and size, the bore from flow and cost, and the seat from temperature and media – then let the datasheet set the limits. That order avoids most type-selection mistakes. Floating bodies suit smaller, moderate-pressure lines; trunnion bodies suit larger sizes and higher classes; full bore protects flow and pigging; reduced bore protects budget; soft seats seal clean service tightly; metal seats survive heat and abrasion.

Share your medium, operating conditions, size, end connections and document requirements with XINTAI, and we will confirm the body, bore, seat and drawing before production. [Request a quotation](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/page/contact.md).

[Get a Quote](https://www.xintaivalves.com/wp-content/uploads/wp-mfa-exports/page/contact.md)