30 Jun,2024

With the price of oil at an all-time low, end-users are looking for ways to increase the life of their industrial valves. These methods include proper installation and valve selection. A poorly installed valve can cause the valve to fail sooner than it should, meaning a higher replacement cost.

16 Jun,2024

Are V-ball valves directional? The answer to this question is yes. These valves are directional in the sense that they are used to direct a fluid, such as air or water, in a specific direction. V-ball valves are directional in the sense that their seats are oriented in one direction, and the seat retainer is […]

12 Dec,2023

If you are looking for information on the Difference between Gate Valves and Globe Valves, you’ve come to the right place. Both types of valves perform the same function – controlling flow – but they have very different designs. If you’re looking for a valve to regulate a large flow of liquid, you might want […]

11 Dec,2023

If you’re at the helm of an industrial project, navigating the intricate world of valves isn’t a new thing anymore. However, your success hinges on finding the perfect gate valve suppliers in India – a task that feels like searching for a needle in a haystack.  As the heartbeat of your project relies on the […]

10 Feb,2023

Bronze valves are typically manufactured for industrial applications, as well as those for marine and petrochemical industries. They have a variety of features, ranging from solid wedge design to spring-loaded, and are suitable for progressive or directional closing. Generally, the internal parts of these valves are subject to considerable stress, which leads to corrosion and […]

28 Dec,2022

A trunnion valve is a type of valve that has two main parts: the trunnion ball and the valve’s casing. The casing attaches to the valve through threaded connections. To access the valve, the casing is opened, and the valve can be removed from the pipeline. The valve covering must then be installed on the […]

28 Dec,2022

A fully welded ball valve is built with a high-pressure cap welded onto both sides. A pressure test valve is then installed, and a small amount of water is injected into the valve. This pressure is set to 1.5 times the nominal ball valve pressure and maintained for 15 minutes. This test is designed to […]

28 Dec,2022

A ball valve is a flow control device that uses a hollow perforated ball that pivots to control the flow of fluid. A ball valve is open when the ball hole is lined up with the flow inlet and closed when the valve handle is swung 90 degrees. These valves are commonly used in HVAC […]

27 Dec,2022

A ball valve is a device used to control the flow of fluid. It has a perforated, hollow ball at the center that pivots. When the hole in the ball lines up with the flow inlet, the ball valve is open. The valve can be closed by pivoting the ball handle 90 degrees. Ball valves […]