Fill in our quote request form and we will reply to your message as soon as possible! Or send us an email at: [email protected]
We supply a wide range of strainer collections used in the filtration of liquid, steam as well as gas. You will find different specifications of Y-type strainers like stainless steel Y strainer, cast steel Y strainer, forged steel Y strainer, thread Y strainer, etc.
Our Y strainer collection filters fluids through a mesh to remove large particles and protects equipment by trapping solids before they can enter the main parts of the system.
Our Y-type strainers are designed to withstand high pressure and work for years to come. They consist of a wire mesh element with structural support as well as a blow-off valve to flush the system without stopping the flow. Our industrial strainer collection goes through basis inspection and a variety of tests. We carry special tests according to customer requirements and deliver the best quality products.
There are several types of industrial strainers on the market. At Xintai Valve Group, we design and manufacture Thread Y strainers, Basket Strainers, Stainless Steel Y Strainers, Cast Steel Y Strainers, etc. Each one has its own specific uses and benefits.
This industrial strainer is available in sizes from 1/2″ up to 4″ and helps to capture debris in the water, air, oil, as well as some corrosive liquids. This prevents damage to the main system components. It is available in pressure class range, 800WOG, PN16 to PN63. It can be used in a wide variety of industrial applications, i.e., wastewater treatment facilities, landfills, chemical production, petrochemical filtration, the oil and gas industry, etc.
Our basket strainers are single-chambered pieces of equipment that separate debris and particles from a flowing fluid. They are usually installed in pipeline systems and can remove even the smallest particles. These strainers come in different sizes and shapes, i.e., 1″~24″ DN25~DN600. They can be used in water, oil, ink, coolant, and cutting-oil filtration processes. They can be fabricated according to the operating pressure and flow rate expectations of the customer.
Our forged steel Y strainers are a vital part of a pipeline system that helps protect valves and measurement equipment. They come with a variety of end connections to ensure proper installation and ease of maintenance. These strainers are available in a range of mesh sizes, i.e., 1″~24″ DN25~DN600. They are made of forged steel and fall into the pressure class of 150LB-1500LB.
These strainers are commonly used for natural gas and other applications. They are available in several different sizes (1/2″ up to 24″). They can handle up to 10K To 40K pressure. This type of strainer should be considered if you need to handle a large volume of solids or chemicals. These strainers are made of cast steel.
Our stainless steel Y strainer is an efficient option for industrial processes, particularly for those that handle corrosive media. They are versatile and come in a variety of sizes (1/2″ up to 24″) to meet your specific needs. These strainers are durable and offer excellent filtration. They are also designed to prevent contamination and ensure that your processes stay safe. These strainers can be installed on both horizontal and vertical pipes, and they are cost-effective.
The DIN valves are threaded valves manufactured by experts in the field who believe in delivering quality, durability, and the latest technology. The product range includes industrial valves manufactured following the DIN standards.
At Xintai Valve Group, we offer the best industrial strainer solution to keep the system and pipelines running smoothly in oil & gas and petrochemical companies. By using our Y strainers, you can easily filter out all the foreign debris without putting strain on the system
Our Y strainers are an effective way to filter waste or other mediums. It is a flexible solution, allowing for high-quality filtration. The design of our strainers allows for a higher flow coefficient while reducing differential pressure. The Y-type strainer’s design makes it ideal for applications requiring a small footprint and maximum efficiency.
Our Y strainers are used to remove solids from fluids that are running through pipelines. They use a wire or perforated mesh strainer to trap debris. It is commonly used in suction or gravity-fed pipelines and helps protect downstream equipment from damage. It is also a cost-effective solution for removing solids from pipelines.
Our strainers are easy to install and can be used in a variety of applications, including fluid, steam, and gas transportation. They are available in a variety of materials and are typically supported by a perforated sheet. They can be installed in either a vertical or horizontal position.
Our Y-type strainers are used in a variety of industrial applications to remove solids from fluids. They are designed to prevent clogging and minimize the maintenance of processing equipment. They are made from stainless steel mesh to resist corrosion, impact, and abrasion. They are designed to withstand extreme pressure without bursting or clogging.
Our strainers are commonly used in petrochemical and oil refineries due to their excellent mechanical and thermal shock resistance. They offer excellent mechanical and thermal shock resistance and can tolerate the continuous flow of liquids.
Our industrial strainer collection includes several types of strainers for different applications. The main purpose of these pieces of equipment is to protect downstream equipment from particles. In addition to filtering out debris, they protect the mechanical equipment in the pipeline. Here are some features of our strainer collection.
We design and manufacture a wide range of industrial strainers and also accept custom orders. We can customize the strainer as per the client’s requirements.
Our Y strainers come in different sizes, mesh configurations, and end connections. Depending on the industrial application, you will find strainers in various sizes and end connections.
Our strainers are available in a wide range of materials, including carbon steel, stainless steel, forged steel as well as cast steel. Other alloys are available for the wetted parts as well.
Furthermore, our strainers are corrosion-resistant, making them ideal for situations where freeing your production process from contamination is critical.
A plethora of services for Strainer
We follow stringent measures and dual inspections in accordance with world standards. We are committed to high-quality manufacturing using advanced detection equipment and precise testing methods.
With a capacity of producing 2,70,000 valves annually, we work round the clock to provide custom-made valves as per our client's needs. From material to size and design to applications, everything can be customized
Accurate installation and proper maintenance of the valve are imperative in maintaining a safe industrial environment. Your safety is our priority.
At Xintai we are devoted to excellent customer service. You can rely on us for queries, doubts or any other issues related to our product and service. Our team is always available online, on calls or face to face to serve you better
We are a prestigious the Strainer manufacturer from China.XINTAI is registered with the following governmental agencies:
Foctory View
Contact
Top
