3-Way T Port Ball Valve Collection
A 3-way ball valve has three ports: an entry port, a discharge port, and a third or diverting port. There are two types of T ports ball valves available in the market, i.e., T port and L port. "T" port valves direct flow to two sources and block the third channel. L port valves connect two orthogonal pipelines and serve only as a distribution device. When the T-port valve is installed, the ball is rotated to the rear of the valve to stop the flow. If the T-port valve is installed on both branches, it can only shut off one branch. If the T-port valve is shutting off, you'll need a second valve on the opposite branches.
Ball Valves
3-Way T Port Ball Valve Manufacturing
About XINTAI VALVES Manufacturer
XINTAI VALVE GROUP CO., LTD. was founded in 1998, is a professional industrial ball valve manufacturing company that conjoins R&D, casting, development, production and sale. The Group's headquarters is located in the Longgang Airport New District, Wenzhou, and is centered on research and manufacturing technology.
The factory covers an area of approximately 30,800 square meters. The two major bases for casting were respectively located in the central industrial zone of Longwan District, Wenzhou, with an area of 9,800 square meters. Longwan Airport New Area Casting Base in Wenzhou, with an area of 28,000 square meters. The existing staff of 578 people, including high and mid-level engineering and technical personnel 58 people, mainly in oil, natural gas, chemical, power stations, metallurgy, national defense, water conservancy projects, pharmaceuticals and other fields.
3-Way T Port Ball Valve Inspection Report
We will issue an inspection report like this before all orders ship. The basic inspection steps include a visual examination, dimension check, witnessing test, painting check, packaging check, then issuing the finished test report. We can also carry out special tests according to customer requirements.
Our Team
We Will Serve You With The Best of Our Capacity By Expert Team
We are prestigious industrial 3-Way T Port Ball Valve manufacturer and supplier of Industrial Casting Ball Valves in Wenzhou.
XINTAI is registered with the following governmental agencies:
American Petroleum Institute(API) No. 6D-1778
Quality Management System Certificate of Approval (ISO9001:2015)
Certificate of Quality System Approval(CE) No. HPiVS-IP1001-015-Q-04-00
Certification of Registration( OHSAS18001) No.86185710109S
We design, engineer and produce your tailor-made valves.
The Best Solution for Oil& Gas industry
Serving an impressive list of long-term clients with experience and expertise in industries.
What is 3-Way T Port Ball Valve?
If you're planning on using a ball valve with three ports, you've probably wondered what a 3-way T port ball valve is. Three-way valves divert media in two directions. Their ports are labeled as one outlet and two inlets.
Three-way ball valves have two types, T-port and L-port. They send media to one location, shut off a flow in the other direction, or mix two different types of flow. Depending on your application, a T-port is better for your needs. In general, a T-port is more versatile than an L-port, but you can't go wrong with either type.
A T port ball valve can be used to divert the flow as well as mix the flow. It can also be used as an L port ball valve. This type of 3-way ball valve has a T shape design and can be used to mix different materials. It is also known as a 180-degree ball valve.
To stop flow through a 3-way T port ball valve, you must turn the handles 90 degrees counterclockwise to stop the flow in one direction. This action turns the ball 180 degrees and cuts off flow in the other direction. The arrow on the handle mimics the cutout section of the ball in the valve. The reverse process will open the other port.
Working Principle of a Three-Way T Port Ball Valve
A three-way T-pattern ball valve works by allowing the flow of one medium through the opposite inlet. To switch between the two, simply turn the handle counterclockwise at 90 degrees. A 90-degree turn will block the flow, while a 180-degree turn will allow it to return to its starting position. This valve features two shut-off positions, and it can be used with either the two-directional or common-port flow.
A three-way T port ball valve is an important piece of equipment for any process. It allows you to direct one flow to another while mixing two others. The tee-shaped indicator on a 3-way ball valve mimics a section of a ball inside the valve. This valve is also commonly known as a diverter valve. You can find this valve in any industrial setting. If you're using one for a project in the manufacturing process, you'll need to consider the size and shape of the valve.
The working principle of a three-way T-port ball valve is simple. One valve serves two inlets, while the other is shut off. The third channel is only used to connect two orthogonal pipelines. You just need to turn the handle 90 degrees to start the flow. When it turns it in one direction, one side is blocked, and the rest is opened. When you turn it to another side, the other side is closed, and the rest is opened. When you turn it completely, all sides are open.
Contact Us
If you want to get a quotation or more product details, please leave us a message.
